View source for NOTE regarding JTAG on Philips LPC

← NOTE regarding JTAG on Philips LPC

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

If JTAG is enabled on the chip, then '''all of pins P0.22 thru P0.31 are disabled''', and taken over by ETM which you can't disable. 

Various PINSEL settings for non-gpio functions: 

Uart0:  PINSEL0 0x00000005
i2c:            0x00000050
spi:            0x00005500

Return to NOTE regarding JTAG on Philips LPC.

Retrieved from "https://www.heepy.net/index.php/NOTE_regarding_JTAG_on_Philips_LPC"